inkl. 19% USt. , zzgl. Versand
The Classi.Audio Bypass PCB is a simple general purpose relay based Bypass PCB which fits to all back-panels and Neutrik NC3FAV, NC3MAV connectors. You can use two of these modules for a stereo set, you can break the XLR modules to expand the distance if the integrated slide should not fit to your xlr distance. This PCB is optimazed in size to recieve the smallest possible pcb for your projects. You can enhance a switch easily or just put it on your power supply 12V voltage. The recommended relays make a trough bypass / hard bypass from input to output as soon the power is off. As soon power is fed to bypass PCB the relays pass the signal to signal out and from your design you just need a molex wire or pcb connector to feed the signal back to the output. The connectors are molex standard 2-pin and 3-pin which we have available as well. Or just select the optionale components-kit for this project to have a full set. Solder, plug & play.
General purpose PCB can be used for commercial or home DIY Projects.
Function:
1. Insert 12V DC coming from your device or a simple ON/OFF toggle switch to one of the LINK 2-Pin Molex connectors on the PCB
2. Once 12V DC is off, the Relay Bypass the Signal to the XLR out, once on, the Signal goes the route to the OUT1 on the PCB.
3. Enjoy this fine project
Alle Bewertungen:
Hard Bypass, works great! I purchased this bypass for my DIY compressor and it worked from scratch with the XLR space. Thanks for the good support to figure out the how to mod the output to adjust the bypass output volume. Highly recommended!
I purchased this bypass for my DIY compressor and it worked from scratch with the XLR space. Thanks for the good support to figure out the how to mod the output to adjust the bypass output volume. Highly recommended!
Bitte beachten Sie unsere Datenschutzerklärung
